Split Tube Furnace with 60mm Ni-Based Superalloy Tube for 10E-6 Torr High Vacuum and 300 PSI High Pressure

The furnace also can be used under high pressure upto 20 atm both in oxygen and inert gas. Product Description

OTF1200X-60UV is CE certified 60mm dia. Ni based super-alloy tube furnace with CF flange and KF25 adaptor for ultra- high vacuum application upto  10^-6 torr and 1200°C. Precision temperature controller can provide 30 segments programmable profile with +/- 1°C accuracy.   The furnace also can be used under high pressure upto 20 atm both in oxygen and inert gas.

Specifications:

Furnace casing	Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C.High purity fibrous alumina insulation for Max. energy saving.
Power	3.0  KW  Max. ( 20A breaker required)
Voltage	AC 208-240 Single Phase, 50/60 Hz
Max. Temperature	1100°C  ( < 1 hour )
Continuous Temperature	1000°C
Max. Heating Rate	<= 30°C /min
Processing Tube	Material: Nickel based super-alloy seamless tube with max. 1200°C working temperature  Tube Size:  OD 60 x  ID 52 x  Length 1000 (mm)
Heating Zone length	440 mm ( single zone )
Constant temperature zone	150  mm (+/-1°C)
Temperature controller	PID automatic control with 30 steps programmable Automatic ver-temperature and thermal broken protection
Temperature Accuracy	+/ - 1°C
Vacuum Sealing & Connection	Two sets of CF-63 flanges are included in the standard package:High Vacuum CF-63 Flange: KF40 vacuum pump connector, KF25 vacuum pressure senser connector, right-angle vacuum valves and one meter long SS bellows are installed in one side flange for connecting to vacuum pump.  (for use under high pressure only )High Pressure CF-63 Flange: 1/4" swagelok connector and SS needle valve are installed in another flange for gas flow. (for use under high pressure)
Pressure limited	Under High Pressure:   Warning:  Must limit working temperature under a certain positive pressure limited by vessel material strength 800 PSI max      at  800°C  (50 bar)300 PSI max.     at 1000°C (20 bar)130 PSI max.     at 1100°C (9 bar )Never heat up vessel above 1200oCUnder high vacuum1E-2 torr by a mechanical pump5E-6 torr by a compact molecular pumpPlease order vacuump pump by click picture below at extra cost .
Heating Element	Fe-Cr-Al Alloy doped by Mo

Split Tube Furnace with 60mm Ni-Based Superalloy Tube for 10E-6 Torr High Vacuum and 300 PSI High Pressure