- Motorcycle Ramps[9]
- Other Vehicle Tools[1]
- Lab Drying Equipment[7]
- Laboratory Heating Equipments[1]
- Other Lab Supplies[4]
- Other Consumer Electronics[10]
- Electronic & Instrument Enclosures[2]
- Other Electrical Equipment[2]
- Semiconductors[4]
- Electronics Production Machinery[2]
- Other Electronic Components[7]
- Laboratory Furniture[6]
- Filing Cabinets[9]
- Mailboxes[1]
- Drying Equipment[10]
- Heat Transfer Equipment[10]
- Other Metal Processing Machinery[5]
- Metal Processing Machinery Parts[1]
- Packaging Machinery[5]
- Testing Equipment[10]
- Safes[10]
- Display Racks[1]
- Other Service Equipment[1]
- Tool Cabinet[1]
- Contact Person : Ms. bo Kitty
- Company Name : Changshu Tongrun Electronic Co., Ltd.
- Tel : 86-512-52847596
- Fax : 86-512-52173876
- Address : Jiangsu,CHANGSHU,48Nijiaba Hongqiao Yushan zone Changshu city
- Country/Region : China
- Zip : 215500
Related Product Searches:Protector Controlled Atmosphere Glove Boxes,High Quality,glove box, inert gas protection box,WHC-1
Introduce:
A glove box is a protection container to allow one operate researches in a inert atmosphere,such as argon or nitrogen.
As usual,glove box is pumped through a series of devices which remove water and oxygen from the gas.
Glove box is always used in lithium batteries,polymers,OLED research and development,semiconductors,catalyst,nanomaterials research and so on
Application:
The WHC-1 is a small size stainless steel glove box with chamber size of 22'x 17' x 16" and Airlock Chamber, Gauges and vacuum Flange, which allows glove box go higher vacuum to remove moisture and oxygen and operate under negative pressure without expensive inert gas purging It is a great choice for material and chemical research to handle air sensitive materials and solution at low cost.
moisture can be below 180 ppm and oxygen below 200 ppm.
Features
Made of 11 gauge ( 3 mm thickness ) 304 stainless steel sheet with sport frame , which provide heavy duty structure for high vacuum.Two vacuum flanges are included and allow glove box go higher vacuum to remove moisture and oxygen and operate under negative pressure without expensive inert gas purgingOne KF-25 connector is installed in the back for connecting humidity monitor or other testing equipmentsSpecifications
main chamber size: 22'x 17' x 16"
Vacuum pressure:In airlock chamber when close inside door: up to 0.05 Torr (0.067 mbar); In side glove box when closing front flange: up to 0.5 Torr (0.67 mbar) Note: The glove box is not designed for high vacuum. Stainless steel case may deform at higher vacuum Positive pressure:Max: 1.1 atm Note: gloves cannot work if pressure is higher than 1.1 atm, 810 torrs Leakage rate : < 6 torr/hour Inert gases pressure maintain:> 12 hours Shipping dimension:45x45x37" Shipping weight: 210 lbs Details:Protector Controlled Atmosphere Glove Boxes