Changshu Tongrun Electronic Co., Ltd.
Main products:Dry Cabinet,Nitrogen Cabinet
Contact Us
  • Contact Person : Ms. bo Kitty
  • Company Name : Changshu Tongrun Electronic Co., Ltd.
  • Tel : 86-512-52847596
  • Fax : 86-512-52173876
  • Address : Jiangsu,CHANGSHU,48Nijiaba Hongqiao Yushan zone Changshu city
  • Country/Region : China
  • Zip : 215500

lab equipments,stainless steel glove box with pressure control system,good idea for lithium batteries research

lab equipments,stainless steel glove box with pressure control system,good idea for lithium batteries research
Product Detailed
stainless steel vacuum glove box with 1,airlock chambergauges 2,transarent front panel 3,easy operation


A glove box is a protection container to allow one operate researches in a inert atmosphere,such as argon or nitrogen.

As usual,glove box is pumped through a series of devices which remove water and oxygen from the gas.

Glove box is always used in lithium batteries,polymers,OLED research and development,semiconductors,catalyst,nanomaterials research and so on


Heavy duty Stainless steel structure made by 10 gauge ( 3 mm) thick SS304 sheet. It provides a clean, air-tight, controlled environment for a wide range of researching processes in material science, chemistry and semiconductor and related industries.Vacuum flanges are included and allow glove box go higher vacuum to remove moisture and oxygen and operate under negative pressure without expensive inert gas purging.Two gloves ports for easy operation by multi-person operation.Transparent front panel with dimension 41" L x 16"W, and you may take off windows to put in your device into chamber.  All necessary accessories are included and ready to use.Larger Airlock transition chamber  (14" diameter x 17" length).Two rubber gloves with clamps, and sealing flanges.One vacuum gauge is installed in airlock chamber.1 set of 1/2" barbed needle valve and 1 KF-25 Vacuum port built in Airlock.2 sets  KF25 port are built on the back of  glove box chamber.3 sets  KF40 port are built on the back of  glove box chamber for connecting to gas purification system.Power extension (4 plugs) built in glove box to allow you operate device up to 1500W inside glove box.One bottle of vacuum grease is included to get best sealing of the O-ring.Technical specifications:Glove box dimension:    1160 mm (46") W x 870mm (34") D x 915 mm (36") HChamber dimension:      1120 mm (44") W x 740mm (29") D x 900 mm (35") HTransparent front panel dimension:1040mm (41") x 405 (16")Air-Lock chamber:        360mm (14") diameter x 435mm (17") length Glove port size:            190 mm diameter  ( 7.5" )Glove material:              8'' Butadyl® gloves, which Increased stretching, bending ability and tear strength, and  Offer strong resistance to aromatics, hydrocarbons, solvents, fats, and acids.Front window size:        41" L x 16" mm WVacuum Pressure:        in airlock chamber: up to 0.05 Torr (0.067 mbar); In all glove box: up to 0.5 Torr (0.67 mbar)  (Note: The glove box is not designed for ultra-high vacuum. Stainless steel case may deform at higher vacuum)Positive Pressure:        Max: 1.1 atm  (note: gloves can not work if pressure is higher that 1.1 atm 810 torrs)Inert gases pressure maintain: > 12 hoursMain chamber leakage rate: < 3 torr/hourShipping weight:  790lbs Shipping dimension:  78x40x58"

lab equipments,stainless steel glove box with pressure control system,good idea for lithium batteries research

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.